JOT manufactures Hydraulic and Pneumatic operated Mud Buckets; size 6 Ft long suitable for 2-7/8" to 5-7/8 & 2-7/8" to 6-5/8" tubular that replace the manually operated Mud Bucket. Bucket opening & closing operated by Hydraulic or Pneumatic, also provided self locking system for safety at the time of operation. The extension arm enables extension and retraction of bucket between parked position and the well centre through Hydraulic or Pneumatic operation. When the mud has been drained from the bucket, with the help of operating lever the bucket clamps off and the extension arm retracts the bucket in parked position.
Hydraulic/Air operated Mud Bucket is an innovative mud bucket, designed for 100% drilling fluid recovery, it improves Drilling operations safely by preventing slick floors that eliminates the chances of slipping accidents on Rig Floors and also reduces crew clean-up time and cuts wash-water disposal volumes. JOT manufactured Mud Buckets are designed to increase safety, to improve working environment and better retention of expensive drilling fluids results in significant cost savings.
JOT Model No. |
MG 6L H ( Hydraulic) MG 6L P ( Pneumatic) |
Dimensions (L x W x H) | 2000 x 800 x 2900 mm 79 x 31.5 x 114 inches |
Range of Pipe sizes | 2-7/8", 3-1/2", 4", 5", 5-1/2" & 5-7/8" |
Time cycle(extension arm-retract) | 15 seconds |
Time cycle(Bucket open-close) | 05 seconds |
Time cycle(Extension arm-extend) | 15 seconds |
Drain hose size | 6000 [19.7] mm [Feet] |
Maximum Travel Length | 2800 [9.2] mm [Feet] |
Hydraulic Mud Bucket |
|
Hydraulic Flow | Q= min. 50 l/min (13gallon/min) |
Working Pressure for Hydraulic | 160 bar / 2320 psi (Minimum) |
Pneumatic Mud Bucket |
|
Working Pressure for Pneumatic | 10 Bar / 145 psi ( Maximum ) |